|When buying||Discount of|
|3 Items||6,01 $/Item|
(24x) DARK CRYSTAL 250mL
*FULL CASES ONLY*
Warning: Last items in stock!
|3||6,01 $||18,03 $|
After extensive research and development, DarkCrystal Glass Inc. is proud to offer you CLEAR - a non-toxic, non-carcinogenic, unscented cleaning solution for surfaces such as acrylic, metal, cotton wick and specialty glass. A cleaning product so safe, yet so powerful. By simply soaking the surface in the solution it removes stubborn stains and rinses free leaving no toxic residue. A truly natural alternative. We like that.Since the beginning of specialized surface cleaners, options have generally consisted of chemical based solutions.
*Pour Clear directly into the vessel you wish to clean, making sure to seal any holes to prevent leakage. For smaller pieces fill up a sealable, microwavable container to soak them in, or heat clear in a saucepan on stovetop.
*Leave item soaking until surface is free of sticky residue. You may assist cleaning with a pipe cleaner or cotton swab. In some cases agitation is necessary after soaking to get into corners plugged with residue. *Carefully shake vessel when full of solution to break down thicker, hard to reach sticky residue if necessary.
*Pour cleaner out of vessel and quickly rinse with hot/warm water to remove any resin/ residue left behind. Repeat this process if necessary.
*Some thicker carbon build up from high heat applications may need to be rubbed with a cotton swab or pipe cleaner to be removed after soaking on high heat accessories. When cleaning quartz accessories you will need to wipe out the built up carbon after soaking.
*Remove solution from bottle first! Bottle is not microwavable.
*Pour contents into a microwavable dish and heat on high for 1 to 2 minutes or until warm. Be careful it could be hot! If you are cleaning quartz you will want it hot.
*Place quartz item into warm bath of hot solution and watch it work instantly.
If you heat Clear up past 100 degrees F, take care to wear hand protection, such as an oven mitt or similar item, as you would when touching anything hot.
*After using your quartz piece, while quartz is still warm, use a cotton swab soaked with Clear to wipe out any stubborn residues. An alternative method with our 30ml Clear Drops polishing drops is to simply add a few drops between uses, wiping with a cotton swab to clean up residue. This process works best if the
quartz is warm.
*Soaking quartz pieces over night when not in use is a great way to keep them clean.
*Add a few drops of Clear to your water chamber to help resin from building up. If you see bubbles you have added too much. By adding a few drops, you’ll make cleaning day a breeze! Note: Water may turn cloudy when Clear is added. This is normal. It does not need to be changed when this happens. Water turning cloudy shows that Clear is working properly.
*To collect the built up sticky residue during cleaning is easy. Simply pour the solution out of your dirty glass piece through a filter of your choice (coffee filter works best in our opinion). Once your filter has collected all the left over residues you can rinse it under the tap to remove any remains of the cleaning solution. No purging is required! Our solution is safe to eat and the residue it collects from dirty glass is ready to use in whatever application you deem worthy, straight off the filter.
*To remove calcium stains on glass you must use the solution hot, leaving the solution soaking in the affected item may also be required. After rinsing or soaking the item with hot solution, some agitation may be required to fully remove the stain. We recommend a hand full of salt and some hot water. After removing the cleaning solution from your stained piece, simply add salt and hot water. Shake the mixture around the stained area, then rinse and repeat if the stain remains. Not all calcium stains are removable.
Safe on Glass, Quartz, Acrylic, Titanium, Ceramic
*FULL CASES ONLY*
12 other products in the same category: